DOOR LEAF CONSTRUCTION

Transoms include main beams (two horizontal and two vertical beams made of woodderived
materials), set of glazing beads, main beam connectors and trims.
Transoms are manufactured and delivered to the Customer in the form of sets of elements
to be assembled on the site.

FINISHING

The following veneers are used for transoms: Portadecor, Portacortex, Super Matt, Portadur,
PVC, HQ CPL and natural veneers. The veneer colours match the standard door leaf colours
off ered by Porta KMI Poland.

ACCESSORIES TO BE CHARGED ADDITIONALLY

• finishing with satin natural veneer – pro A x A and A x B

• finishing with satin natural veneer – pro B x B

The range of transoms covers wall thicknesses between 75 and 300 mm.
• Transoms combined with the Porta System ; standard height at the rabbet is 270 mm. HO, HB, HZ + 302 mm – Porta SYSTEM door frame height.
• Independent transom sizes and heights available „40”, „50”, „60”, „70”, „80”, „90”, „100”
and „120”-”220”.
The maximum transom size is limited by the glass area which cannot exceed 3 m2.

NOTES

• Transom is not glazed. Recommended glazing thickness - 4÷6 mm.
• Transom should be installed only after the interior works are fi nished (e.g. wall paper and parquet are in place).