Door leaf frame is made of slow-burning, chemical resistant, water-resistant material. Core is made of hard polyurethane foam with similar properties. Door leaf components are joined using water-resistant and chemical resistant adhesive. Frame with core is coated from both sides with HPL – material resistant to mechanical damage.
Door leaf is available only in non-rebate version.
Door leaf is coated with HPL veneer (1.5 mm thick).
Single leaf: full and with glazing.
• two hinges made of stainless steel
• pane pattern (transparent or hardened mat)
• lock made of stainless steel available in three versions: for regular key, with bathroom lock or cylinder insert
• door frame
• 100” size
• handle with escutcheon (EDEL)
• ventilation grid made from stainless steel
• expanding the frame section from 101 to 150 mm
• expanding the frame section from 151 to 270 mm
• expanding the frame section from 271 to 390 mm
• Large angle-bar frame of profile 100 mm. The frame is made of both sides zinc coated steel 1.2 mm thick. It is equipped with: two hinges pintle standard, circumferential rubber seal, six assembly dowels. It’s also painted with polyester powder paint: white (RAL 9016), grey (RAL 7047) or blue (RAL 5005).
Door frame is available in two versions:
– for setting on already prepared floor – level “0”
– for cementing in the floor – level “-30”.
---
Any content of the website www.portadoors.com is not a trade offer in
the meaning of the Civil Code and is published for information purpose
only, and we accept no liability whatsoever in this respect. In the case
of consumer sale as referred to in the Act of 27.07.02 on specific
conditions of consumer sale and amending the Civil Code, information
provided on this website neither constitutes any assurance in the
meaning of Article 4 (3) of the Act nor a description of the commodity
in the meaning of Article 4 (2) of the Act. Porta KMI Poland S.A.
reserves the right to change the data provided on the website
www.portadoors.com including technical parameters, dimensions, prices
and specifications, without previous notice.