SS – total leaf width, including rebates
HS – total leaf height, including rebate
DS – thickness of door leaf
S0 – width of wall opening ready for door frame setting
H0 – height of wall opening ready for door frame setting, measured from the finished floor level
SB – width of door frame, door trims excluded
HB – height of door frame, door trims excluded
SZ – total width of door frame, including door trims
HZ – total width of door frame, including door trims
MS – width of sliding door masking system
MG – thickness of sliding door masking system
BG – thickness of sliding door stop beam
TS/W – permissible deviation from width/height of wall opening
All dimensions – in millimeters [mm].


Notice

• Expected distance between the bottom edge of the door leaf and the finished floor level is 8mm.
• Given leaf thickness dimension (Ds) can be increased by using thicker veneer.
• The frames are designed for installation on a finished, ready to use floor. Metal frames may be ordered 30 mm longer, to dip the ends in the floor concrete. In such a case, the H0 and HZ dimensions must be increased by 30 mm (level „-30”).
• To work out the width of double-leaf doors (SS, S0, SB, SZ), dimensions given in the table must be added to the width of the second leaf or extension (SS dimension), and then reduced by 10 mm.
• Dimension tolerance in accordance with the Polish Standard (PN): up to 1 m: ± 1 mm, above 1 m: ± 2 mm.